View 74LVC3G14GF_8614827.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. general description the 74lvc3g14 provides three inverting buffers with schmitt trigger input. it is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. the inputs can be driven from either 3.3 v or 5 v devices. this feature allows the use of this device in a mixed 3.3 v and 5 v environmen t. schmitt trigger action at the inputs makes the circuit tolerant of slower input rise and fall time. this device is fully specified for partial power-down applications using i off . the i off circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. features and benefits ? wide supply voltage range from 1.65 v to 5.5 v ? 5 v tolerant input/ output for interfacing with 5 v logic ? high noise immunity ? esd protection: ? hbm jesd22-a114f exceeds 2000 v ? mm jesd22-a115-a exceeds 200 v ? ? 24 ma output drive (v cc =3.0v) ? cmos low power consumption ? latch-up performance exceeds 250 ma ? direct interface with ttl levels ? unlimited rise and fall times ? multiple package options ? specified from ? 40 ? c to +85 ? c and ? 40 ? c to +125 ? c. 3. applications ? wave and pulse shaper for highly noisy environment ? astable multivibrator ? monostable multivibrator. 74lvc3g14 triple inverting schmitt tr igger with 5 v tolerant input rev. 12 ? 9 april 2013 product data sheet
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 2 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 4. ordering information 5. marking [1] the pin 1 indicator is located on the lower left corner of the device, below the marking code. table 1. ordering information type number package temperature range name description version 74lvc3g14dp ? 40 ? c to +125 ? c tssop8 plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm sot505-2 74lvc3g14dc ? 40 ? c to +125 ? c vssop8 plastic very thin shrink small outline package; 8 leads; body width 2.3 mm sot765-1 74lvc3g14gt ? 40 ? c to +125 ? c xson8 plastic extremely thin small outline package; no leads; 8 terminals; body 1 ? 1.95 ? 0.5 mm sot833-1 74LVC3G14GF ? 40 ? c to +125 ? c xson8 extremely thin small outline package; no leads; 8 terminals; body 1.35 ? 1 ? 0.5 mm sot1089 74lvc3g14gd ? 40 ? c to +125 ? c xson8 plastic extremely thin small outline package; no leads; 8 terminals; body 3 ? 2 ? 0.5 mm sot996-2 74lvc3g14gm ? 40 ? c to +125 ? c xqfn8 plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 ? 1.6 ? 0.5 mm sot902-2 74lvc3g14gn ? 40 ? c to +125 ? c xson8 extremely thin small outline package; no leads; 8 terminals; body 1.2 ? 1.0 ? 0.35 mm sot1116 74lvc3g14gs ? 40 ? c to +125 ? c xson8 extremely thin small outline package; no leads; 8 terminals; body 1.35 ? 1.0 ? 0.35 mm sot1203 table 2. marking codes type number marking code [1] 74lvc3g14dp v14 74lvc3g14dc v14 74lvc3g14gt v14 74LVC3G14GF vk 74lvc3g14gd v14 74lvc3g14gm v14 74lvc3g14gn vk 74lvc3g14gs vk
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 3 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 6. functional diagram 7. pinning information 7.1 pinning fig 1. logic symbol fig 2. iec logic symbol fig 3. logic diagram (one schmitt trigger) 001aah728 1a 1y 3y 3a 2a 2y 001aah729 mna025 a y fig 4. pin configuration sot505-2 and sot765-1 fig 5. pin configuration sot833-1, sot1089, sot1116 and sot1203 74lvc3g14 1a v cc 3y 1y 2a 3a gnd 2y 001aag081 1 2 3 4 6 5 8 7 74lvc3g14 3a 1y v cc 2y 2a 3y 1a gnd 001aab834 36 27 18 45 transparent top view
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 4 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 7.2 pin description 8. functional description [1] h = high voltage level; l = low voltage level fig 6. pin configuration sot996-2 f ig 7. pin configuration sot902-2 001aai242 74lvc3g14 transparent top view 8 7 6 5 1 2 3 4 1a 3y 2a gnd v cc 1y 3a 2y 001aag082 3y 3a 1a v cc 2a 1y gnd 2y transparent top view 3 6 4 1 5 8 7 2 terminal 1 index area 74lvc3g14 table 3. pin description symbol pin description sot505-2, sot765-1, sot833-1, sot1089, sot996-2, sot1116 and sot1203 sot902-2 1a, 2a, 3a 1, 3, 6 7, 5, 2 data input 1y, 2y, 3y 7, 5, 2 1, 3, 6 data output gnd 4 4 ground (0 v) v cc 8 8 supply voltage table 4. function table [1] input na output ny lh hl
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 5 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 9. limiting values [1] the input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] when v cc = 0 v (power-down mode), the output voltage can be 5.5 v in normal operation. [3] for tssop8 package: above 55 ? c the value of p tot derates linearly with 2.5 mw/k. for vssop8 package: above 110 ? c the value of p tot derates linearly with 8 mw/k. for xson8 and xqfn8 packages: above 118 ? c the value of p tot derates linearly with 7.8 mw/k. 10. recommended operating conditions table 5. limiting values in accordance with the absolute maximum rating system (iec 60134). voltages are referenced to gnd (ground = 0 v). symbol parameter conditions min max unit v cc supply voltage ? 0.5 +6.5 v i ik input clamping current v i < 0 v ? 50 - ma v i input voltage [1] ? 0.5 +6.5 v i ok output clamping current v o > v cc or v o < 0 v - ? 50 ma v o output voltage active mode [1] [2] ? 0.5 v cc + 0.5 v power-down mode [1] [2] ? 0.5 +6.5 v i o output current v o = 0 v to v cc - ? 50 ma i cc supply current - 100 ma i gnd ground current ? 100 - ma p tot total power dissipation t amb = ? 40 ? c to +125 ?c [3] - 250 mw t stg storage temperature ? 65 +150 ?c table 6. operating conditions symbol parameter conditions min max unit v cc supply voltage 1.65 5.5 v v i input voltage 0 5.5 v v o output voltage active mode 0 v cc v power-down mode; v cc =0v 0 5.5 v t amb ambient temperature ? 40 +125 ?c
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 6 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 11. static characteristics table 7. static characteristics at recommended operating conditions; volt ages are referenced to gnd (ground = 0 v). symbol parameter conditions min typ [1] max unit t amb = ? 40 ?c to +85 ?c v oh high-level output voltage v i =v t+ or v t ? i o = ? 100 ? a; v cc = 1.65 v to 5.5 v v cc ? 0.1 - - v i o = ? 4 ma; v cc = 1.65 v 1.2 - - v i o = ? 8 ma; v cc = 2.3 v 1.9 - - v i o = ? 12 ma; v cc = 2.7 v 2.2 - - v i o = ? 24 ma; v cc = 3.0 v 2.3 - - v i o = ? 32 ma; v cc = 4.5 v 3.8 - - v v ol low-level output voltage v i =v t+ or v t ? i o = 100 ? a; v cc = 1.65 v to 5.5 v - - 0.1 v i o = 4 ma; v cc = 1.65 v - - 0.45 v i o = 8 ma; v cc = 2.3 v - - 0.3 v i o = 12 ma; v cc = 2.7 v - - 0.4 v i o = 24 ma; v cc = 3.0 v - - 0.55 v i o = 32 ma; v cc = 4.5 v - - 0.55 v i i input leakage current v i = 5.5 v or gnd; v cc = 0 v to 5.5 v - ? 0.1 ? 5 ? a i off power-off leakage current v i or v o = 5.5 v; v cc = 0 v - ? 0.1 ? 10 ? a i cc supply current v i = 5.5 v or gnd; i o =0a; v cc = 1.65 v to 5.5 v -0.110 ? a ? i cc additional supply current v i = v cc ? 0.6 v; i o = 0 a; v cc = 2.3 v to 5.5 v -5500 ? a c i input capacitance v cc = 3.3 v; v i = gnd to v cc -3.5-pf t amb = ? 40 ? c to +125 ?c v oh high-level output voltage v i =v t+ or v t ? i o = ? 100 ? a; v cc = 1.65 v to 5.5 v v cc ? 0.1 - - v i o = ? 4 ma; v cc = 1.65 v 0.95 - - v i o = ? 8 ma; v cc = 2.3 v 1.7 - - v i o = ? 12 ma; v cc = 2.7 v 1.9 - - v i o = ? 24 ma; v cc = 3.0 v 2.0 - - v i o = ? 32 ma; v cc = 4.5 v 3.4 - - v v ol low-level output voltage v i =v t+ or v t ? i o = 100 ? a; v cc = 1.65 v to 5.5 v - - 0.1 v i o = 4 ma; v cc = 1.65 v - - 0.7 v i o = 8 ma; v cc = 2.3 v - - 0.45 v i o = 12 ma; v cc = 2.7 v - - 0.6 v i o = 24 ma; v cc = 3.0 v - - 0.8 v i o = 32 ma; v cc = 4.5 v - - 0.8 v i i input leakage current v i = 5.5 v or gnd; v cc = 0 v to 5.5 v - - ? 20 ? a
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 7 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input [1] all typical values are measured at maximum v cc and t amb = 25 ? c. [1] all typical values are measured at t amb = 25 ? c [2] v h = v t+ ? v t ? i off power-off leakage current v i or v o = 5.5 v; v cc = 0 v - - ? 20 ? a i cc supply current v i = 5.5 v or gnd; i o =0a; v cc = 1.65 v to 5.5 v --40 ? a ? i cc additional supply current v i = v cc ? 0.6 v; i o = 0 a; v cc = 2.3 v to 5.5 v - - 5000 ? a table 7. static characteristics ?continued at recommended operating conditions; volt ages are referenced to gnd (ground = 0 v). symbol parameter conditions min typ [1] max unit table 8. transfer characteristics voltages are referenced to gnd (ground = 0 v; for test circuit see figure 9 symbol parameter conditions ? 40 ? c to +85 ?c ? 40 ? c to +125 ?c unit min typ [1] max min max v t+ positive-going threshold voltage see figure 10 and figure 11 v cc = 1.8 v 0.70 1.10 1.50 0.70 1.70 v v cc = 2.3 v 1.00 1.40 1.80 1.00 2.00 v v cc = 3.0 v 1.30 1.76 2.20 1.30 2.40 v v cc = 4.5 v 1.90 2.47 3.10 1.90 3.30 v v cc = 5.5 v 2.20 2.91 3.60 2.20 3.80 v v t ? negative-going threshold voltage see figure 10 and figure 11 v cc = 1.8 v 0.25 0.61 0.90 0.25 1.10 v v cc = 2.3 v 0.40 0.80 1.15 0.40 1.35 v v cc = 3.0 v 0.60 1.04 1.50 0.60 1.70 v v cc = 4.5 v 1.00 1.55 2.00 1.00 2.20 v v cc = 5.5 v 1.20 1.86 2.30 1.20 2.50 v v h [2] hysteresis voltage see figure 10 , figure 11 and figure 12 v cc = 1.8 v 0.15 0.49 1.00 0.15 1.20 v v cc = 2.3 v 0.25 0.60 1.10 0.25 1.30 v v cc = 3.0 v 0.40 0.73 1.20 0.40 1.40 v v cc = 4.5 v 0.60 0.92 1.50 0.60 1.70 v v cc = 5.5 v 0.70 1.02 1.70 0.70 1.90 v
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 8 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 12. dynamic characteristics [1] typical values are measured at t amb =25 ? c and v cc = 1.8 v, 2.5 v, 2.7 v, 3.3 v and 5.0 v respectively. [2] t pd is the same as t plh and t phl . [3] c pd is used to determine the dynamic power dissipation (p d in ? w). p d =c pd ? v cc 2 ? f i ? n+ ? (c l ? v cc 2 ? f o ) where: f i = input frequency in mhz; f o = output frequency in mhz; c l = output load capacitance in pf; v cc = supply voltage in v; n = number of inputs switching; ? (c l ? v cc 2 ? f o ) = sum of outputs. 13. waveforms table 9. dynamic characteristics voltages are referenced to gnd (ground = 0 v). for test circuit see figure 9 . symbol parameter conditions ? 40 ? c to +85 ?c ? 40 ? c to +125 ?c unit min typ [1] max min max t pd propagation delay na to ny; see figure 8 [2] v cc = 1.65 v to 1.95 v 1.0 4.2 11.0 1.0 12.0 ns v cc = 2.3 v to 2.7 v 0.5 3.0 6.5 0.5 7.2 ns v cc = 2.7 v 0.5 3.8 7.0 0.5 7.7 ns v cc = 3.0 v to 3.6 v 0.5 3.2 6.0 0.5 6.7 ns v cc = 4.5 v to 5.5 v 0.5 2.4 4.3 0.5 4.7 ns c pd power dissipation capacitance v i = gnd to v cc ; v cc = 3.3 v [3] - 18.1 - - - pf measurement points are given in table 10 . v ol and v oh are typical output voltage levels that occur with the output load. fig 8. the data input (na) to output (ny) propagation delays mna344 t phl t plh v m v m v m v m na input ny output gnd v i v oh v ol
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 9 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 14. waveforms trans fer characteristics table 10. measurement points v cc input v m output v m 1.65 v to 1.95 v 0.5 ? v cc 0.5 ? v cc 2.3 v to 2.7 v 0.5 ? v cc 0.5 ? v cc 2.7v 1.5v 1.5v 3.0v to 3.6v 1.5v 1.5v 4.5 v to 5.5 v 0.5 ? v cc 0.5 ? v cc test data is given in table 11 . definitions for test circuit: r l = load resistance. c l = load capacitance including jig and probe capacitance. r t = termination resistance should be equal to the output impedance z o of the pulse generator. v ext = external voltage for measuring switching times. fig 9. test circuit for measuring switching times v ext v cc v i v o mna616 dut c l r t r l r l g table 11. test data supply voltage input load v ext v cc v i t r =t f c l r l t plh , t phl 1.65 v to 1.95 v v cc ? 2.0ns 30pf 1k ? open 2.3 v to 2.7 v v cc ? 2.0ns 30pf 500 ? open 2.7v 2.7v ? 2.5ns 50pf 500 ? open 3.0v to 3.6v 2.7v ? 2.5ns 50pf 500 ? open 4.5 v to 5.5 v v cc ? 2.5ns 50pf 500 ? open v t+ and v t ? limits at 70 % and 20 %. fig 10. transfer characteristic fig 11. definition of v t+ , v t ? and v h mna207 v o v i v h v t+ v t? mna208 v o v i v h v t+ v t?
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 10 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 15. application information the slow input rise and fall times cause ad ditional power dissipation, this can be calculated using th e following formula: p add =f i ? (t r ?? i cc(av) +t f ?? i cc(av) ) ? v cc where: p add = additional power dissipation ( ? w); f i = input frequency (mhz); t r = input rise time (ns); 10 % to 90 %; t f = input fall time (ns); 90 % to 10 %; ? i cc(av) = average additional supply current ( ? a). ? i cc(av) differs with positive or negative input transitions, as shown in figure 13 . an example of a relaxation circuit using the 74lvc3g14 is shown in figure 14 . v cc = 3.0 v fig 12. typical transfer characteristics 01 0.5 1.5 2 v i (v) 0 14 10 12 8 4 6 2 mdb627 i cc (ma)
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 11 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input linear change of v i between 0.8 v to 2.0 v. all values give n are typical unless otherwise specified. (1) positive-going edge. (2) negative-going edge. fig 13. ? i cc(av) as a function of v cc 234 6 50 0 40 5 30 20 10 mnb086 i cc(av) (ma) v cc (v) (1) (2) fig 14. relaxation oscillator mna035 r c f 1 t -- - 1 0.8 rc ? --------------------- ? =
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 12 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 16. package outline fig 15. package outline sot505-2 (tssop8) unit a 1 a max. a 2 a 3 b p lh e l p wy v ce d (1) e (1) z (1) references outline version european projection issue date iec jedec jeita mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 8 0 0.13 0.1 0.2 0.5 dimensions (mm are the original dimensions) note 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 sot505-2 - - - 02-01-16 w m b p d z e 0.25 14 8 5 a 2 a 1 l p (a 3 ) detail x a l h e e c v m a x a y 2.5 5 mm 0 scale tssop8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm sot505-2 1.1 pin 1 index
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 13 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 16. package outline sot765-1 (vssop8) unit a 1 a max. a 2 a 3 b p lh e l p wy v ce d (1) e (2) z (1) references outline version european projection issue date iec jedec jeita mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 8 0 0.13 0.1 0.2 0.4 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 q 0.21 0.19 sot765-1 mo-187 02-06-07 w m b p d z e 0.12 14 8 5 a 2 a 1 q l p (a 3 ) detail x a l h e e c v m a x a y 2.5 5 mm 0 scale vssop8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm sot765-1 1 pin 1 index
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 14 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 17. package outline sot833-1 (xson8) terminal 1 index area references outline version european projection issue date iec jedec jeita sot833-1 - - - mo-252 - - - sot833-1 07-11-14 07-12-07 dimensions (mm are the original dimensions) xson8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm d e e 1 e a 1 b l l 1 e 1 e 1 0 1 2 mm scale notes 1. including plating thickness. 2. can be visible in some manufacturing processes. unit mm 0.25 0.17 2.0 1.9 0.35 0.27 a 1 max b e 1.05 0.95 d ee 1 l 0.40 0.32 l 1 0.50.6 a (1) max 0.5 0.04 1 8 2 7 3 6 4 5 8 (2) 4 (2) a
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 15 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 18. package outline sot1089 (xson8) references outline version european projection issue date iec jedec jeita sot1089 mo-252 sot1089_po 10-04-09 10-04-12 unit mm max nom min 0.5 0.04 1.40 1.35 1.30 1.05 1.00 0.95 0.55 0.35 0.35 0.30 0.27 a (1) dimensions note 1. including plating thickness. 2. visible depending upon used manufacturing technology. xson8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1 x 0.5 mm sot1089 a 1 bl 1 0.40 0.35 0.32 0.20 0.15 0.12 deee 1 l 0 0.5 1 mm scale terminal 1 index area e d detail x a a 1 l l 1 b e 1 e terminal 1 index area 1 4 8 5 (4) (2) (8) (2) x
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 16 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 19. package outline sot996-2 (xson8) references outline version european projection issue date iec jedec jeita sot996-2 sot996-2_po 07-12-21 12-11-20 unit (1) mm max nom min 0.5 0.05 0.00 2.1 1.9 3.1 2.9 0.5 0.3 0.15 0.05 0.6 0.4 0.5 1.5 0.05 a dimensions (mm are the original dimensions) xson8: plastic extremely thin small outline package; no leads; 8 terminals; body 3 x 2 x 0.5 mm sot996-2 a 1 b 0.35 0.15 deee 1 ll 1 l 2 v 0.1 wy 0.05 y 1 0.1 0 1 2 mm scale c y c y 1 x terminal 1 index area b a d e detail x a a 1 b 14 85 e 1 e ac b v c w l 2 l 1 l
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 17 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 20. package outline sot902-2 (xqfn8) references outline version european projection issue date iec jedec jeita sot902-2 - - - mo-255 - - - sot902-2_po 10-11-02 11-03-31 unit (1) mm max nom min 0.5 0.05 0.00 1.65 1.60 1.55 1.65 1.60 1.55 0.55 0.5 0.15 0.10 0.05 0.1 0.05 a dimensions note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. xqfn8: plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 x 1.6 x 0.5 mm sot902-2 a 1 b 0.25 0.20 0.15 deee 1 l 0.35 0.30 0.25 l 1 vw 0.05 yy 1 0.05 0 1 2 mm scale terminal 1 index area b a d e x c y c y 1 terminal 1 index area 3 l l 1 b e 1 e ac b v c w 2 1 5 6 7 metal area not for soldering 8 4 a 1 a detail x
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 18 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 21. package outline sot1116 (xson8) references outline version european projection issue date iec jedec jeita sot1116 sot1116_po 10-04-02 10-04-07 unit mm max nom min 0.35 0.04 1.25 1.20 1.15 1.05 1.00 0.95 0.55 0.3 0.40 0.35 0.32 a (1) dimensions note 1. including plating thickness. 2. visible depending upon used manufacturing technology. xson8: extremely thin small outline package; no leads; 8 terminals; body 1.2 x 1.0 x 0.35 mm sot1116 a 1 b 0.20 0.15 0.12 deee 1 l 0.35 0.30 0.27 l 1 0 0.5 1 mm scale terminal 1 index area e d (4) (2) (8) (2) a 1 a e 1 e 1 e 1 e l l 1 b 4321 5 6 7 8
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 19 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input fig 22. package outline sot1203 (xson8) references outline version european projection issue date iec jedec jeita sot1203 sot1203_po 10-04-02 10-04-06 unit mm max nom min 0.35 0.04 1.40 1.35 1.30 1.05 1.00 0.95 0.55 0.35 0.40 0.35 0.32 a (1) dimensions note 1. including plating thickness. 2. visible depending upon used manufacturing technology. xson8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1.0 x 0.35 mm sot1203 a 1 b 0.20 0.15 0.12 deee 1 l 0.35 0.30 0.27 l 1 0 0.5 1 mm scale terminal 1 index area e d (4) (2) (8) (2) a a 1 e l l 1 b e 1 e 1 e 1 1 8 2 7 3 6 4 5
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 20 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 17. abbreviations 18. revision history table 12. abbreviations acronym description cmos complementary metal-oxide semiconductor dut device under test esd electrostatic discharge hbm human body model mm machine model ttl transistor-transistor logic utlp ultra-thin leadless package table 13. revision history document id release date data sheet status change notice supersedes 74lvc3g14 v.12 20130409 product data sheet - 74lvc3g14 v.11 modifications: ? for type number 74lvc3g14gd xson8u has changed to xson8. 74lvc3g14 v.11 20120706 product data sheet - 74lvc3g14 v.10 modifications: ? for type number 74lvc3g14gm the sot code has changed to sot902-2. 74lvc3g14 v.10 20111123 product data sheet - 74lvc3g14 v.9 modifications: ? legal pages updated. 74lvc3g14 v.9 20110922 product data sheet - 74lvc3g14 v.8 74lvc3g14 v.8 20100819 product data sheet - 74lvc3g14 v.7 74lvc3g14 v.7 20080612 product data sheet - 74lvc3g14 v.6 74lvc3g14 v.6 20080207 product data sheet - 74lvc3g14 v.5 74lvc3g14 v.5 20071005 product data sheet - 74lvc3g14 v.4 74lvc3g14 v.4 20070314 product data sheet - 74lvc3g14 v.3 74lvc3g14 v.3 20050131 product data sheet - 74lvc3g14 v.2 74lvc3g14 v.2 20041027 product data sheet - 74lvc3g14 v.1 74lvc3g14 v.1 20040510 product data sheet - -
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 21 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input 19. legal information 19.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term ?short data sheet? is explained in section ?definitions?. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple device s. the latest product status information is available on the internet at url http://www.nxp.com . 19.2 definitions draft ? the document is a draft versi on only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 19.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such info rmation. nxp semiconductors takes no responsibility for the content in this document if provided by an information source outside of nxp semiconductors. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors and its suppliers accept no liability for inclusion and/or use of nxp semiconducto rs products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is customer?s sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customer?s applications and products planned, as well as fo r the planned application and use of customer?s third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer?s applications or products, or the application or use by customer?s third party customer(s). customer is responsible for doing all necessary testing for the customer?s applic ations and products using nxp semiconductors products in order to av oid a default of the applications and the products or of the application or use by customer?s third party customer(s). nxp does not accept any liability in this respect. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any lic ense under any copyrights, patents or other industrial or intellectual property rights. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objecti ve specification for product development. preliminary [short] data sheet qualification this document contains data from the preliminary specification. product [short] data sheet production this document contains the product specification.
74lvc3g14 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 12 ? 9 april 2013 22 of 23 nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input export control ? this document as well as the item(s) described herein may be subject to export control regu lations. export might require a prior authorization from competent authorities. non-automotive qualified products ? unless this data sheet expressly states that this specific nxp semicon ductors product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nxp semiconductors accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses t he product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without nxp semiconductors? warranty of the product for such automotive applicat ions, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nxp semiconductors? specifications such use shall be solely at customer?s own risk, and (c) customer fully indemnifies nxp semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive app lications beyond nxp semiconductors? standard warranty and nxp semiconduct ors? product specifications. 19.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. 20. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors 74lvc3g14 triple inverting schmitt trigger with 5 v tolerant input ? nxp b.v. 2013. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 9 april 2013 document identifier: 74lvc3g14 please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 21. contents 1 general description . . . . . . . . . . . . . . . . . . . . . . 1 2 features and benefits . . . . . . . . . . . . . . . . . . . . 1 3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 ordering information . . . . . . . . . . . . . . . . . . . . . 2 5 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 functional diagram . . . . . . . . . . . . . . . . . . . . . . 3 7 pinning information . . . . . . . . . . . . . . . . . . . . . . 3 7.1 pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7.2 pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 functional description . . . . . . . . . . . . . . . . . . . 4 9 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 10 recommended operating conditions. . . . . . . . 5 11 static characteristics. . . . . . . . . . . . . . . . . . . . . 6 12 dynamic characteristics . . . . . . . . . . . . . . . . . . 8 13 waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 14 waveforms transfer characteristics. . . . . . . . . 9 15 application information. . . . . . . . . . . . . . . . . . 10 16 package outline . . . . . . . . . . . . . . . . . . . . . . . . 12 17 abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 20 18 revision history . . . . . . . . . . . . . . . . . . . . . . . . 20 19 legal information. . . . . . . . . . . . . . . . . . . . . . . 21 19.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . 21 19.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 19.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 19.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 20 contact information. . . . . . . . . . . . . . . . . . . . . 22 21 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

▲Up To Search▲

Price & Availability of 74LVC3G14GF

	To Download 74LVC3G14GF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .